2400W USA AUTO STEPDOWN NOT DIELECTRICALLY ISOLATED TRANSFORMER

Be The First To Review This Product!

Help other KG Electronic Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review

2400W USA AUTO STEPDOWN NOT DIELECTRICALLY ISOLATED TRANSFORMER

2400 WATTS - 240V TO 110V STEPDOWN TRANSFORMER
A Stepdown Transformer is the ideal solution if you have an appliance designed to run on America's 110-volt system but is needed to run on Australia's 240-volt power.

This transformer converts 240 volts into 110 volts to allow your US / overseas appliances to run in Australia.  Just plug the transformer into Aussie power socket & the device into the power outlet of the transformer! 

Our Step Down Transformers are of the Highest Quality:

All our Stepdowns come with a 1 Year Money Warranty!
Our unit is fully isolated for optimum efficiency and safety
Double wound and insulated input to output, this means it is more electrically safe
Comply with Australian standards - made to AS/NZS61558
We include Safety Fuse protection
Enclosed and strong metal construction with rubber feet and powder finish
Thermal overload in the winding of the transformer
Strong Carry handle
All enclosures are earthed to chassis
100% electrical & flash tested
Note - Isolation unit ***NO EARTH CARRIED THROUGH***

1700W IS MAX USAGE ON ONE PLUG. 15 AMP SOCKET PULLS 1700W. TOTAL OUTPUT MUST NOT EXCEED 2400W

FEATURES:
All units are isolated
Primary voltage is 240V 50Hz
All units are double wound
METAL ENCLOSURE
Fuse protected outlet
USA female socket single up to 1000VA, two for2000VA
Input: Australian flex and plug
Test voltage 3.75 KV ACRMS; primary to secondary
Fuse protection on 240V side
500VA and above are also overload protected
Manufactured to standard AS 3108-1990
Primary Voltage: 240V
Secondary Voltage: 115V
Rated VA: 2400
Dimensions (WHD): 230 x 160 x 300mm
Replacement Fuse 3AG Delay Type, 12Amp

(SD110-A2400W)

This item comes with a 12 months warranty

2400W USA AUTO STEPDOWN NOT DIELECTRICALLY ISOLATED TRANSFORMER2400 WATTS - 240V TO 110V STEPDOWN TRANSFORMER A Stepdown Transformer is the ideal solution if you have an appliance designed to run on America's 110-volt system but is needed to run on Australia's 240-volt power. This transformer converts 240 volts into 110 volts to allow your US / overseas appliances to run in Australia.  Just plug the transformer into Aussie power socket & the device into the power outlet of the transformer!  Our Step Down Transformers are of the Highest Quality: Our unit is fully isolated for optimum efficiency and safety Double wound and insulated input to output, this means it is more electrically safe Comply with Australian standards - made to AS/NZS61558 We include Safety Fuse protection Enclosed and strong metal construction with rubber feet and powder finish Thermal overload in the winding of the transformer Strong Carry handle All enclosures are earthed to chassis 100% electrical & flash tested Note - Isolation unit ***NO EARTH CARRIED THROUGH*** 1700W IS MAX USAGE ON ONE PLUG. 15 AMP SOCKET PULLS 1700W. TOTAL OUTPUT MUST NOT EXCEED 2400W FEATURES: All units are isolated Primary voltage is 240V 50Hz All units are double wound METAL ENCLOSURE Fuse protected outlet USA female socket single up to 1000VA, two for2000VA Input: Australian flex and plug Test voltage 3.75 KV ACRMS; primary to secondary Fuse protection on 240V side 500VA and above are also overload protected Manufactured to standard AS 3108-1990 Primary Voltage: 240V Secondary Voltage: 115V Rated VA: 2400 Dimensions (WHD): 230 x 160 x 300mm Replacement Fuse 3AG Delay Type, 12Amp
Model # SD110-A2400W
Barcode # 793591006178
Brand TORTECH
Shipping Weight 17.5000kg
Shipping Width 0.230m
Shipping Height 0.160m
Shipping Length 0.300m
Shipping Cubic 0.011040000m3
Type Toroidal Auto Transformer