Mclelland Phono Preamp With Line In Usb Rip and Gain Control RIAA Standard

This item comes with 12 months warranty

UP2 Phono Preamp with USB  Features  For all turntables with moving magnet (MM) cartridges or audio devices with line level (e.g. tape decks)  External housing, reliably shielded against interference  Audio recording takes place through USB  No need to open the computer housing  Top quality circuit technology and components  Built-in low-noise phono preamp circuit conforms to the RIAA standard  Signal and peak LED  No additional drivers required  Power supply included  Applications  Home recording  Converting older audio formats to new digital format through USB  DJ mixing & recording tracks  Digital home studio  High quality computer audio playback  Adding computer audio source to your mixer  Audio archiving  Frequency response: 10 Hz ~ 20K Hz, +/-.5dB  THD: 0.01% Typical @1 KHz  Hum and Noise: >89dB below clipping  Maximum input level: 40mVrms @ 1 KHz (phono), +19dBu (line)  Analog output connections: RCA (preamp line output), 1/8" mini jack (USB monitor/headphone output)  A/D & D/A: 16 bit, 44.1 KHz or 48 KHz USB selectable  Computer interface: USB2.0 compliant, Windows & Mac OS9.1 or newer  Power requirement: 9VAC @150mA, or USB bus powered  Dimensions: 113mm x 73mm x 40mm 

Specifications

• Frequency response: 10 Hz ~ 20K Hz, +/-.5dB
• THD: 0.01% Typical @1 KHz
• Hum and Noise: >89dB below clipping
• Maximum input level: 40mVrms @ 1 KHz (phono), +19dBu (line)
• Analog output connections: RCA (preamp line output), 1/8" mini jack (USB monitor/headphone output)
• A/D & D/A: 16 bit, 44.1 KHz or 48 KHz USB selectable
• Computer interface: USB2.0 compliant, Windows & Mac OS9.1 or newer
• Power requirement: 9VAC @150mA, or USB bus powered
• Dimensions: 113mm x 73mm x 40mm